Maintenance3 Array 24x

Maintenance3 Array 24x (with recycling)

24联-维护 III 生产模块 (带回收)

24 maintenance depots. Provides 5.7k Maintenance III for your industrial empire.

(I doubt anyone will use that much though :P)

Train-feed module. All I/O marked on surface tiles.

Setup

Plug-and-play.

1. Put down the blueprint and connect seawater input and brine dump. You will need 9 seawater pumps.
2. Connect the train station to your rail network.
3. Deliver a little water to the bootup storage tank. Remove or pause it later once production started.

Tips

• The blueprint can work under all recycle rate conditions (20%~75%), but depending on your recycle strategy, the I/O may vary drastically.

• Requires at least 25% recycle rate to reach full capacity. (i.e. 40+ copper scrap & 5+ gold scrap from single sorting plant)

• Numbers on the tiles are a rough estimate at 32% recycle rate (recycle edict I).
  With higher recycle rate, you will need less raw ore for this blueprint.

• All byproducts, including recycled scraps (if any) must be removed to keep it running.

• The blueprint can accept and consume some external copper scrap and gold scrap.

Operational cost