Tileable Water Station FBR

Output: 4608 Water
Output: 2688 Brine

To be used with the Flexible Feeder FBR blueprint. See pictures for placement using the belts next to the Nuclear Reprocessor Plant. This is a large blueprint so be careful and make sure the belts by the Nuclear Reprocessor plant aligns, the HUD show say it's safe to place with no warnings except the "red" pipe errors (which are fine). But you know you're right when you get no HUD errors.

Pictures for Placements are in the Power Station FBR blueprints (they all fit in any order after the Feeder FBR).

Flexible Feeder FBR:
https://coigame.com/Blueprint/3731/Tileable-Flexible-Feeder-FBR

Beware that you need a LOT OF Seawater for this, and a LOT OF excess dump pumps (see pictures). It's designed so that you don't need to consume any of it, all water can be dumped and all brine can be dumped. At this stage i usually switch my FBR water inputs to only use water produced fro this FBR, and chain it to the water inputs in front of each FBR making them all more or less self-sustained.

I also have included a Brine-pipe in the back that is good to connect to 9 Salt-plants in the space of the Feeder FBR so that the setup is also self-producing all the salt it consumes. At this point if you go 6+ FBRs it will use a lot of salt. I seem to use a lot of salt and depending on what you do with your Brine, i would recommend taking the excess and do Clorine or an additional 9 salt plants, I use tons of salt for various reasons and i find it difficult to scale up to the needs.