Issue description
I was having issues with my Nuclear plant running out of steam all the time. It would crash then slowly restart without any apparent issue. Then I noticed a couple of my thermal desalinators were not working. Once I examined them, it was apparent that there was not enough steam to run them properly. I checked and the coal fired boiler was indeed producing 8 steam per 10 seconds. But when I checked the desalinators, 2 would run all the time, one would run every second pulse of the boiler, and the 4th would never run. I disconnected the boilers and desalinators, hooked them 1 to 1 on a long pipe and checked the consumption. The thermal desalinators were using 3 high pressure steam per 10 seconds and NOT the 2 that they are reported to.
Reproduction steps
Hook up a thermal desalinator to a boiler and watch the pipe between them, every time the desalinator reloads steam, the volume in the pipe drops 3 high pressure steam and not 2. Does not matter what save I play, it's the same on all of them. Thermal desalinators are using 3 high pressure steam per cycle.
Game version and build number
0.5.5 B246
Operating system
Windows
