Exhaust scrubber doesn't export sulfur

Issue description

I built an exhaust scrubber and attached a loose belt to the sulfur output. I have done this many times in other places in my factory but next to my food processing area a newly built sulfur processing plant as of version 0.7.5c doesn't export sulfur.

Reproduction steps

1. Load attached save.
2. Find the only exhaust scrubber in the food processing area.
3. Observe no export of sulfur.
4. Delete building and place in exact same spot and reconnect belts/pipes and observe the same issue.
5. You can even move it a few tiles forward and back and reconnect belts/pipes and see the same issue.

Game version and build number

v0.7.5c

Operating system

Windows

Attachments

Link to google drive because attaching here kept saying failed. https://drive.google.com/file/d/1K-TbWtWluEij7_K53AOGaocu7pqE5tNv/view?usp=sharing

in addition, adding limestone recipe to existing exhaust scrubber in U2 save, does not show the limestone input port or slag output port.

The conveyor belt isn't connected to anything at the other end, therefore it doesn't work.

The exhaust scrubber was connected to a tier 3 storage on the other side of the food factory on a very long belt. After placing a second one near it and connecting all the belts/pipes both started working.

If you see it as connected, then make an appointment with an optometrist.

Oh that would be why. I think I know what happened I must have pressed R
while building that belt from storage to exhaust scrubber and since it's so
long didn't check that the initial connection stayed connected.

On Fri, Jun 20, 2025, 7:10 PM poltime @.***> wrote:

poltime left a comment (MaFi-Games/Captain-of-Industry-issues#2054)
Exhaust scrubber doesn't export sulfur

If you see it as connected, then make an appointment with an optometrist.

1111111111.png (view on web)
457535244-1cb38989-d289-48b5-a450-a3a70129e464.jpg

—
Reply to this email directly, view it on GitHub
Exhaust scrubber doesn't export sulfur,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/ADTNWV4HGGYL3M5FP36SRBT3ESPFZAVCNFSM6AAAAAB7ZGPJNSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDSOJTGE3TOMRUGQ
.
You are receiving this because you authored the thread.Message ID:
@.***>

yes, pressing R disconnecting the initial connection has been a bug since U1 or since the beginning (it's been a while). there are countless videos of this exact thing happening to JD all the time. ultra annoying