请原谅任何不好的翻译。我正在使用谷歌翻译。

在更改设置后，您能否增加一个选项，将设置应用于所有新建建筑？谢谢。

warrenc wrote:

请原谅任何不好的翻译。我正在使用谷歌翻译。

在更改设置后，您能否增加一个选项，将设置应用于所有新建建筑？谢谢。

你可以使用英文,我能看懂,当然非常感谢你用中文和我交流.
感谢你提供的建议,我已经在V6版本加入这个设为默认功能,当然建议你使用V6.0.1版本,因为我修复了小的bug.
有任何问题,给我留言!

You may use English, as I can understand it. Thank you very much for communicating with me in Chinese.

Thanks for your suggestion. I have added this set-as-default function in Version V6. I recommend you use V6.0.1 since I have fixed minor bugs.

Feel free to leave a message if you have any questions!

wtmxhyy wrote:

warrenc wrote:

请原谅任何不好的翻译。我正在使用谷歌翻译。

在更改设置后，您能否增加一个选项，将设置应用于所有新建建筑？谢谢。

你可以使用英文,我能看懂,当然非常感谢你用中文和我交流.
感谢你提供的建议,我已经在V6版本加入这个设为默认功能,当然建议你使用V6.0.1版本,因为我修复了小的bug.
有任何问题,给我留言!

You may use English, as I can understand it. Thank you very much for communicating with me in Chinese.

Thanks for your suggestion. I have added this set-as-default function in Version V6. I recommend you use V6.0.1 since I have fixed minor bugs.

Feel free to leave a message if you have any questions!

Thanks. I tried to use the latest (6.0.1) and maybe I don't understand how to use the default settings. I set the default and set all settings on an already existing building. Then add a new building then check the settings on that new building and they are back to no boost, and all added cost still checked.

Ok, I think I figured it out. I have to Place and set a new building and select all settings and check the default. Then when I add another building like it, it successfully sets its defaults. Can't use a preexisting building of the same type from a previous save.

Thanks for all your hard work.

Time to start a new game. 👍 I do that all the time.

warrenc wrote:

wtmxhyy wrote:

warrenc wrote:

请原谅任何不好的翻译。我正在使用谷歌翻译。

在更改设置后，您能否增加一个选项，将设置应用于所有新建建筑？谢谢。

你可以使用英文,我能看懂,当然非常感谢你用中文和我交流.
感谢你提供的建议,我已经在V6版本加入这个设为默认功能,当然建议你使用V6.0.1版本,因为我修复了小的bug.
有任何问题,给我留言!

You may use English, as I can understand it. Thank you very much for communicating with me in Chinese.

Thanks for your suggestion. I have added this set-as-default function in Version V6. I recommend you use V6.0.1 since I have fixed minor bugs.

Feel free to leave a message if you have any questions!

Thanks. I tried to use the latest (6.0.1) and maybe I don't understand how to use the default settings. I set the default and set all settings on an already existing building. Then add a new building then check the settings on that new building and they are back to no boost, and all added cost still checked.

Ok, I think I figured it out. I have to Place and set a new building and select all settings and check the default. Then when I add another building like it, it successfully sets its defaults. Can't use a preexisting building of the same type from a previous save.

Thanks for all your hard work.

Time to start a new game. 👍 I do that all the time.

I have noticed, I set the settings and boost level then set default, default does not always apply to all the specific building type and sometimes does. Also sometimes It forgets the settings. Though it is easier now than before. It is a bit intermittent. Thank you for all your effort and time.

你应该明白,任何设置都必须首先设定完成后,此时才会写入内存,才能被下次使用所采用.而设为默认的功能,不影响已经建设的建筑,他只对以后的建筑有效.

You need to understand that all settings are written into the memory only after being fully configured, which allows them to be applied in subsequent uses. Functions set as default will not affect existing constructed buildings and only take effect on buildings built afterwards.

wtmxhyy wrote:

你应该明白,任何设置都必须首先设定完成后,此时才会写入内存,才能被下次使用所采用.而设为默认的功能,不影响已经建设的建筑,他只对以后的建筑有效.

You need to understand that all settings are written into the memory only after being fully configured, which allows them to be applied in subsequent uses. Functions set as default will not affect existing constructed buildings and only take effect on buildings built afterwards.

Thanks. Will keep that in mind. 👍